How To Install A Radon Mitigation System In Sump Pump. A sealed sump pump and a professionally installed radon mitigation system work. Sump pump radon system vs drain tile radon system here at lifetime radon solutions, we often get asked how we can run the pipe of a radon system from one end of a house to another.
The sump lid should be air tight to keep a high radon level contained until a radon mitigation professional can be called to fix the issue. Dig out under the slab. We have sump pump pit with radon mitigation system.
Table of Contents
Install A Layer Of Clean Gravel Or Aggregate Beneath The Slab Or Flooring System.
When you hire professional radon specialists to install radon mitigation systems, they ensure your sump pump has a cover. Run the pipe to a fan. To do this, you need a radon detector.
For More Detailed Instructions Visit.
How do you install a radon mitigation system? Cut plexiglass on half and remove the pump, or cut pvc pipe from radon system and them remove plexiglass cover and pump. When installing a radon mitigation system in a home with a sump pump, depending on the location of the sump, it is possible to directly insert the pvc piping as the main suction point for radon removal.
So My Question Is, What Is The Best Way To Replace The Pump:
After 2 days of the sump pump radon fan running. Run pipe from cellar to attic. We’ll need to do a couple things to our existing sump pump before we can apply the sump cover and seal it in place.
If The Home Has A Sump And It Is Not Being Used For A Suction Point, The Sump Will Need To Be Sealed So Radon Does Not Enter Through The Opening.
The sump pump is not the only point. Installing a full sump pump system with the piping costs around $800. This will reduce radon exposure and be effective in a home with normal levels, but if the radon levels in your home are high, it may not be enough.
Radon Is A Naturally Occurring Radioactive Element Found In Soil And Rock.
Among the steps that a sump pump installation company may take in protecting your home from radon is to seal your sump pump. Steps to install a radon mitigation system 1] check the slab for air leaks. A sump pump cover may help to slightly reduce radon levels because it will block a major opening from the ground to your basement.