How To Light A Water Heater With A Lighter. While still holding the gas down, light that pilot. When the flame ignites, continue to hold the gas knob or button down for a full minute.
If your water heater has an ignitor, press down simultaneously on the pilot valve and the red ignitor button. How to light an automatic water heater the first step is turning off the gas by first looking for the knob labeled on/off/pilot. When the flame ignites, continue to hold the gas knob or button down for a full minute.
Table of Contents
You'll Want To Turn The Knob Past Pilot To The Off Position.
Press and hold the control knob to let the gas flow into the pilot light. Then release it slowly, and make sure the light is still lit. Then release it slowly, and make sure the light is still.
Press Control Button And Light.
Body over or in front of heater while lighting.caution: Use either a lighter, match or candle to provide the flame required to relight the pilot light. Some water heaters have a red or black igniting button, and others need to be lit manually with a long lighter.
Check All Gas Connections With A 50/50 Soap And Water Solution To Be Sure They Are Tight And Leak Proof.
When the flame ignites, continue to hold the gas knob or button down for a full minute. How to light a manual heater. It will be in either the front or the back, and it will be a small silver knob.
Look On The Side Of Your Hot Water Tank And Read Through The Procedure That Is Required For Your Water Heater.
Can i manually turn on my natural gas water heater? The pilot light in your water heater is a small device that is designed to provide the flame to light the gas released out of the gas valve and main burner. Different water heaters have different procedures for lighting the pilot.
Switch On The Water Heater
Push on/off dial down, and simultaneously use the lighter. Lighting a water heater pilot light at a glance. Put all the plates back as they were originally placed.